Even if you have no experience tuning RC Nitro engines, you can still learn how to build an amazing RC engine. Using amazing full tuning software you will instantly learn how to tune, modify and build engines that will “rule the competition” in any segment of nitro RC Racing.

History of engine analysis software development:

In the late 1980s, a group of rc boat modellers, who were also engineers, started talking about the possibility of making a tool to accurately measure and document RC motors. Was it possible to get rid of the inaccurate degree wheel?

Could you convert the measurements into useful data and then apply the results to your engines?

They discovered that there were many complex formulas involved in solving these problems. After several years of developing and refining the first engine analysis software, the group developed engine analysis software. They used it continuously and found it indispensable. The performance of the engines in this group increased to the point of dominating national model competitions.

The group decided that this software was too important to the RC modeling community to keep to themselves. A few copies of the software were provided to some of the top rc motor manufacturers and tuners across the country. THEY LOVED IT and used it every day in their engine building business.

The software development group decided to offer it for sale to the competition on a very limited basis. People from all over the world heard about the availability and the pressure to make it available to everyone. Engine manufacturers began using it in their R&D labs. Engine Tuners started using it in their daily engine tuning business. “Super Serious RC Competitors” began using it to build and tune their personal engines.

The program is now used by Serious RC Competitors on Boats, Planes, Cars and all other forms of Nitro RC Racing and Competition.

Engine analysis software will allow you to tune and refine Nitro engines quickly and accurately. Engine analysis software will allow you to UNDERSTAND RC Nitro engines. Have an amazing engine – easily duplicate it. You will be able to produce engines that will have “SUPER PERFORMANCE”. Get a FREE database of dyno and race proven SUPER ENGINES.

Do you race a Nitro On Road Car, Dune Buggy, RC Truck, RC Nitro Boat, High Performance Airplane or Helicopter?

Get the software the pros use…

The competitors that are REALLY fast, in all forms of RC Racing, are the ones that understand HOW to build and tune a high performance motor.

o Have you noticed: “The Engine Guru speaks in a language that the average RC competitor does not understand”
o How is it possible for these people to achieve such an AMAZING performance?
o Can I produce an engine that works as well as theirs?
o Answer: ABSOLUTELY!!!

Even if you don’t own a lot of fancy tools and equipment, you can easily produce great engines for your use. Engine analysis software makes the process possible and easy!

Now it’s not hard to tune an engine using good tuning, good time to area ratios and correct compression ratios!

Learning the procedures to build a high performance engine is EASY, using engine analysis software.

What are the chances that the average modeler will “discover” the secrets to building a high performance engine without The Engine Analysis Software?

NO LUCK AT ALL!

The engine analysis software includes many useful sections including:

– Calculation of compression ratios in two methods
– Conversion of simple measures in degrees of duration
– Head of Manufacturing Module
– Carbohydrate size module
– Time/area study section
– Maximum rod angle output
– Blowing grade outlet
– Crushing speed calculations
– Opening and closing points for rotor or crank induction
– Tuned Pipe Builder
– And much more

All outputs are generated automatically, after entering some motor specific measurements.

You will immediately discover that small changes made with the engine analysis software will result in HUGE performance gains.

Many years of development have gone into this software and I have decided that in order to make it available to as many hobbyists as possible I need to price the software very reasonably. I decided to offer this software at a price that any serious competitor can afford. I know this is a very special offer that will transform your hobby. If you’re still not 100% sure this software is right for you, please contact me directly with specific questions. I’m sure you’ll look back and say this was the best investment you’ve EVER MADE in your rc hobby.

Before the EAP was developed, there was graded wheels, calipers and a lot of guesswork, and two people coming into my shop couldn’t get the same numbers on the same engine. Even I couldn’t do this. Once we had that data, it was just a guess as to what it was going to do or had done to the engine. Compression ratios were nonexistent. Make a button on your head and you still had no idea what you had. Once they got this program up and running, we were able to load the engines until we were blue in the face and then make whatever changes we wanted in the computer and then see how the compression ratio changed etc. and then machine the parts and reload the data until we had what we wanted. we thought we wanted. Now we could run and know what we had and then iterate on that engine, build a slightly different one and see the results right away. I’ve uploaded literally thousands of engines to this program and when an engine comes into my store I can pull the data from all the ones I’ve made and build a similar engine in no time by duplicating the data from a good one. You can’t build an engine without this is all I can say. You do not have reliable and repeatable data

Avoid being an “average RC racer”. Move your level of competition up to the highest level and enjoy your hobby even more.

If you take this first step to get to the front of the pack, you will enjoy your RC Hobby to the level you deserve.