To improve the handling of your 350z, I advise you to upgrade with a Tein H Tech Lowering Spring. Just by adding the Teins H Tech lowering spring, his 350zed handling improved dramatically. A 350zed replacement for the factory springs, the lightweight performance Tein H spring improves handling, reduces body roll and does not adversely affect ride quality. Tein is a well known name when it comes to coilover springs and shock kits. Tein products are made in Japan from high grade material for performance and quality.

The Tein H Tech lowering spring provides approximately 1.0-1.9 inches of drop for a balance between aggressive styling and a comfortable riding experience. Check the detailed specifications of each Tein H spring set for your car for exact drop height measurement. Tein H Tech lowering springs lower your car 1-2 inches. This has the effect of lowering your car’s center of gravity, which improves handling. These new springs also have different spring rates and will generally give you a much stiffer ride than the original springs. You must have a spring compressor tool and know how to use it.

These Tein H Tech lowering springs are under tremendous pressure with an entire car sitting on them, and if one came loose while using the spring compressor, it could easily kill you. Even with the knowledge of how this installation is done, it can still be time consuming. Tein H Tech lowering spring sets feature a rubber spring protector tube to dampen the noise level. Tein H Tech springs are first coated with zinc phosphate, a corrosion resistant material.

The H Tech springs are then finished with a long lasting gold powder coat finish. Additionally, each Tein H Tech spring is made from a new material called Vanadium, a strong, lightweight material that retains more spring travel for optimal quality. Tein H Tech lowering spring gives your car a stylish and modern look and also maintains the quality and stability of the car. Unwanted body roll can also be avoided by using good quality lowering springs. There is no doubt that Tein H Tech lowering springs are the best way to give your car an edge over others and eliminate the gap between the edge of the fender and the top of the wheel.

• All Tein H springs are specifically designed to fit each car for maximum performance
• Approximately 1-2 inch drop for a more attractive appearance
• The Tein H spring is comfortable and the ride quality is still maintained through the use of the OEM rubber and noise protection sheeting.