Home Kitchen admin  

How to restore laminate cabinets

Many people assume that laminate cabinets cannot be restored, but this is far from the truth! There is no need to replace laminate cabinets because they are old or out of date. Instead, you can simply restore them! Instantly brighten, modernize and alter the look of your laminate kitchen cabinets, all within your budget. It is important to review the correct process for refinishing laminate cabinets to achieve the best possible results. For those who are uncomfortable with manual DIY work, there is no need to worry; you can hire a professional contractor and still stay on budget! Read on for a brief guide to refinishing laminate kitchen cabinets and who to call for a professional kitchen remodeling general contractor job in your city!

Laminate kitchen cabinets

If you’re determined to refinish your laminate kitchen cabinets on your own, good for you! Take a look at the guide below to learn about some of the main components and key points of these particular projects. Be sure to prepare by first gathering all the supplies and tools needed to do the job right. These include:

  • Paint and paint primer (based on water)
  • foam rollers
  • rolling pans
  • painter’s tape
  • sandpaper (240 and 150 grit sheets)
  • Old sheets or cloths
  • Disinfectant Spray
  • clean rags
  • microfiber clothing
  • Permanent marker
  • screwdriver

For an even more up-to-date look, you can purchase and install new, more modern-looking cabinet handles. These are available for a variety of designs and prices at any hardware or home store. If any laminate is peeling or cracking, it will need to be replaced entirely. Do not refinish chipped or cracked laminate cabinets. However, if it is only slightly peeling in one corner, you can simply sand the exposed area behind the laminate and then re-attach it with a waterproof adhesive. Use duct tape to hold it in place while it dries. This works best for small areas and corners. Once you’ve stocked up on all the tools and supplies you need, you’re ready to go.

That is how:

Clean all the cabinets first. Dust them with the microfiber cloth to remove solids, then give them a thorough cleaning with the disinfectant spray. This provides greater primer adhesion and ensures a cleaner, more even finish.

Using the screwdriver, remove each face of the cabinet and its handle while keeping track of where each one goes. Use the permanent marker to label each one so you remember where to replace it later.

Place the cabinet faces on the drop cloths, making sure the edges remain exposed and accessible. Make sure the tarps cover enough surface area to protect the surrounding environment from the paint.

Use painter’s tape to line the inside edges of the cabinet faces to prevent paint from dripping. Take your time on this step to ensure accuracy.

Use the 240 grit sandpaper sheets to hand sand the cabinet faces. You may choose to use a portable handheld sander if you are familiar with how it works. Just make sure you don’t sand too hard.

After sanding, use your microfiber cloth to wipe off residual dust and sanding debris. Do it thoroughly and remove as much dust as possible.

Using your foam roller, apply a coat of water-based paint primer to each face of the cabinet. Allow this to dry completely, usually 8-12 hours depending on the brand.

Once the primer has been applied and has dried completely, sand each face of the cabinet again with 150-grit sandpaper. Remove any excess sanding dust with your microfiber cloth afterwards.

Do steps 7 and 8 again.

Once both primer coats have been applied and dried, it’s time to apply the water-based paint of your choice with the second foam roller. Be sure to use V-strokes during application to promote even paint distribution and markings.

Repeat step 10.

Allow cabinets to dry for at least 72 hours before reattaching hardware and reassembling in place. This ensures that the paint has completely dried and hardened.

Not a DIY type of person? No problem!

You may choose to hire a professional painting contractor instead of tackling this project on our own. If you are not familiar with manual work and have never painted before, it may be the smartest choice. And you can still stay within a profitable budget when you hire professionals for the job.

Leave A Comment